Originally posted by Goonz SVT:
Right now it probably looks like (most projectors look like this, not sure about fogs)
you will need to level that line out by using a dremel to get an even cutoff..i say leave it, its soo small of space to work on.
The cutoff on the projectors is most likely flat. If it had the flare that Goonz is showing you would have very poor illumination on the left and it would be too high on the right....for a fog light at least.
The sharpness of the cutoff could possibly be impossible to change. Some projectors, including the DOT Hella 90mm lamps, have fluting on the projectos lens to dull the cutoff. If this is the case, the cutoff cannot be changed easily.
Remember, fog lamps should be aimed with a drop of 4" every 25', unlike the headlamp's 2" for every 25'......should. When my Contour was running 90mms for its foggies they had a flat cutoff shield and were aimed level. 
· Jon Miconi
· Coming Soon!
· 01 Cougar
· 98 V70R
| 
