Originally posted by Kremithefrog:
Do you want adjustability? If so, Ground Controls and Konis.
No, then maybe H&Rs and Bilsteins.
Or cheaper, BAT kit or something similar (BAT springs or Roush springs if you can find them with spax struts for a bit cheaper).
Classifieds of this site is a good place to start.
Bigger rear sway bar.
Poly bushings.
If you have money left, a rear strut tower bar.
You can always upgrade the tires, it can make a huge difference.



All good info. I've had a few setups, and for a big improvement on a daily driver, my choice is BAT kit, BAT 21mm bar, and a rear strut tower brace. That should be near/under $1000.

Only thing is, with the 21mm bar, you will need to reinforce the sway bar mounting tabs or they may snap right off the subframe. Cost to have them boxed at a welding shop should be under $100. Not a difficult job for a pro.

Must be that jumbly-wumbly thing happening again.