Originally posted by 1SWT4DR:
I spoke with a salvage yard, and the gentleman says that the Cam Sensor Position is different from 97 to 98, as well as Intake and Exhaust Manifold.

Has anyone done a swap from a 97 motor to a 98 motor who can tell me first hand how much trouble this will be?

Thanks in Advance,
Brad



Did you read this?

Originally posted by DemonSVT:
The engine swap itself will be straight forward. You may have to retain some of your original sensors but most of them should be interchangeable.



If you need assistance on it... here's it broken down:

1. The engine will fit with no mechanical modifications; if you want to believe the guy at the junkyard, swap the intake/exhaust off the bad engine to the good one.

2. You will need to swap SOME/MOST sensors from the bad engine to the good one. So when you pull the bad engine, compare all the sensors with the new engine... if they are different, use the one off the old engine.

Sorry, for some reason I'm wanting to rag on people!

Goin' Round Traffic Circles @ 50Km/h!!! \m/ -- 1998 E0 SVT #2119 of 6535 \m/ -- 2003 Sentra SE-R Spec V