Originally posted by contour96se:
ok guys. i'm having this problem.. and everytime i change a part it seems to help , but then it goes right back to the same problem.

the car stall on me, clean cut like i shut the key off. the problem mostly STARTS in wet conditions(like if it was raining for a few days). the car will stall, and wont start up again for 5-10 minutes. then she'll start back up again only to do the same thing shortly after UNLESS i keep my foot on the gas.
parts i've changed so far in order :
CRANK SENSOR
IAC - twice!
COMPUTER
please someone help me.. when i bring it to the shop and they put it on the scanner, no codes come up. the only code that came up once was the IAC, thats why i changed it.

WTF is my problem. i can't figure it out.. i'm about to get rid of this car if this keeps happening.
96 countour se
duratec
almost 80000 miles.




Check your wire insulation up by firewall on passenger side leading to PCM. Is the insulation falling off, wires touching, if so tape em up. check wiring under the hood area fuse box. Is the insulation falling off, if so you can try to tape the wires if it is really bad you will need new wire harness.

You say problem occurs mostly when it is raining/wet. Check wire leads to crank / cam sensor.....

Bob

An ounce of prevention provides a pound of cure!