Originally posted by CSVT#49:
Originally posted by brianl703:
It might be worth the effort to run a new wire from the battery back to the regulator (the 3-terminal connector). Or at least disconnecting the old wire so it doesn't short out.
So let me get this straight before I perform this...
Perform everything that is in that diagram, and then in addition run a wire from the positive terminal on the battery to the end of that wire I cut(where the "X" is in the diagram)?
No!!
Just cut the red wire. Leave the wire with an X hanging there on the harness. run the red wire on the 3 pin connector to the main thick wire post of the ALT.
follow me? PM me if you have any questions.
Last edited by GoldnTour; 01/05/06 08:13 PM.