All it takes is for ONE stud to snap then the others will snap quickly as the load goes up on each stud each time one breaks.
i.e.
4 studs = 25% load
3 studs = 33.3% load
2 studs = 50% load
1 stud = 100% load
2000 SVT Turbo 295hp/269ftlb@12psi
#1 for Bendix Brakes Kits!
Knuckles rebuilt w/new bearings $55
AUSSIE ENDLINKS $70
Gutted pre-cats $80/set
A lack of planning on your part does not constitute an emergency on mine!
| 
