Originally posted by mean'tour:
Originally posted by FavoriteMystaque:
You probably need: new Autolite APP764 plugs (double platinums) and a set of Autolite or Motorcraft plug wires. Check for loose wires, excess dirt on the coil pack. Or just clear the code, drive a few days, if it comes back, do the plugs/wires.



Thanks. I replaced the plugs (with Autolite double plats) and wires (Ford Racing 9mm) this year. As far as I could tell (or remember), I replaced the originals.

I'll check for loose wires, etc. then have the code cleared. If it recurs, I'll pull the plug and check it and the wire out.

Thanks for the suggestions. I just wasn't sure where to start.



I ran by another Auto Zone today, to have them reset the code. He came up with same code, and a new one. P0174- list says :

P0174 System Too Lean - Bank No. 2.

I don't know what that means. Anyone? the A. Zone guy said something about an O2 sensor after the cat. Is that something I can change myself? Are there directions anywhere?

Are these 2 codes related? Can I reset the codes myself? (The Gomer at A. Zone wouldn't reset them ... said something about the repair having to be made before...) If so, how?

Thanks for your help.

MUST SELL - ECM computer new for a 98 V6 mtx + pats Now trolling in a Red Nissan 4 x 4