Is that CR 9.6:1 for the stock CR. If so thats pretty low, I thought we had a stock CR that was much higher. I realy wouldn't have to replace my bottom end
(pistons, rods, etc.), I'd just have to get everything resurfaced and replace little stuff(rings, gaskets, bolts, etc.). That would save me about $900+ on parts and laber off top for my upgrade.That's waz up.
Lets start here than, hypothetically speaking, what would be the largest size recomended turbo for the zetec?
I was thinking of getting a Turbonetics T3 turbocharger stage 3 .48 A/R 55 compressor trim. External wastegate
