Originally posted by ndolsongtp:
No, the intake manifolds definately were NOT the least bit wet when I put them back on. I don't remember removing any grounds from the coil pack, unless one inadvertedly came off during the wire swap. The only thing I removed were the 6 wires and the clip that goes on the front side of the coil pack.

I will pull a plug wire when I am home from work and see if there is a spark. will I be able to tell just by looking down inside the boot that connects to the plug? Those things are pretty deep...



Stick you finger in the tower and have someone turn it over!
Just hold the wire an 1/2 inch from the tower and see if a spark jumps to it.