Originally posted by Russell-3L:
id probably use an air chisel to remove the old bushings.
YES!!!!!!
That's exactly what need to be done for ONE of the bushing.
I'm looking for a rear knuckle (i have a spare arm) so i can do a pictoral write-up. I didn't get a chance to snap pics when i did the install for my SVT.
It's certainly nothing to be afraid of.
One thing to note is that the bushing sleve DOES NOT get removed for the arm bushing (i have pic of this part), however MUST be removed in the knuckle, it becomes very aparent why this is when you do the install. In adition i've got a method that eliminates the need for a press. Basically you need an air chissle, a holesaw, and a the right bolt and washer combo(you'll see)
IF anyone has a set of bushing, knuckles and arms they'ld be willing to ship i'll do the install at NO cost an use your parts for a how to to benifit CEG. All i ask is that you pay shipping both ways.
99 SE V6\5spd - 156 HP\157 TQ 15.166-90.84
Totaled 02/12/06
99 SVT # 1571 - 175 HP\153 TQ 14.999-91.88
Born 3/24/99 Reborn 3/18/06
Pietenpol Racing Technologies project vehicle
90 Festiva L 5spd, Blue(not for long), 103k
| 
