Originally posted by rubn3:
Yup, obicanobio, the driver switch is the one I was talking about. Thanks for that piece of info, that should be the source of my problem. If this continues, Im going to franchise a Radio Shack 
Ah, you were talking about the window switches, not the lock switch... Well, the master window switch is in a series like obicanobio said. If you use led's that are 3.7 or 5V, then you don't need a resistor in there, just bridge the gap where the resistor used to be and put in the led's in series. If you have led's were the voltage doesn't add up to more than 13.5V, then you need a resistor.
Glad you got it working.
Sorry for my confusion...
