Originally posted by DubbaDooz:
1.) dremel off the sealant holding the tabs in place
Actually, you don't just cut the tabs, you cut the whole thing apart. It's not for the faint of heart.
And you forgot about the hours of cussing
If you're not patient, don't even try doing this yourself, it's a real PITA. PM Chris, he most likely still has the link somewhere.
I have done this mod and it came out OK. I painted the inside a blue that matches my car. When you tape off the turn signal reflector, make sure you pull the tape off as fast as you can. I used the blue masking tape and thought that I was pulling fast, but I pulled some of the chrome off. Another thing, there is silver around the round edge of the headlamp, I left mine silver and thought it looked like poop when I put it on the car, due to the fact that I have a dark car....it just didn't look right IMHO. I fixed that problem too
