Originally posted by dubkatz:
Originally posted by Nightwolf:
Alright what would need to be done with the drivetrain?
Nothing you do to your dtrain is gonna help make 300whp.
And if you want to make 300whp with a vortech. You will need to either 3.0 it. Or rebuild the 2.5 with lower compression pistons.(waste of time if you ask 75% of the people on this board)
You will also need a much smaller pulley a custom dyno tune, and last but but not least an intercooler. And when your pulling the motor to do a 3.0 thats when you NEED to put a lsd.
i think even if you put smaller compression pistons on a 2.5L, i dont think you could even run a small enough pulley to make 300 whp.
Jim Hahn
1996 T-Red Contour SE Reborn 4/6/04
3.0L swap and Arizona Dyno Chip Turbo Kit
364 whp, 410 wtq @ 4,700 rpm
| 
