Originally posted by Nightwolf:
Alright what would need to be done with the drivetrain?
Nothing you do to your dtrain is gonna help make 300whp.
And if you want to make 300whp with a vortech. You will need to either 3.0 it. Or rebuild the 2.5 with lower compression pistons.(waste of time if you ask 75% of the people on this board)
You will also need a much smaller pulley a custom dyno tune, and last but but not least an intercooler. And when your pulling the motor to do a 3.0 thats when you NEED to put a lsd.
98 csvt t-red.. sho-shop intake, b&m, fidanza, spec1 clutch, Torsen, DMD,optimized Y& TB, Brullen, rear strut bar,h&r's,17" konig traffik's.
"I say what I mean and I do what i say"
| 
