Please dont anyone say ( TRY THE SEARCH )before you post a question that has been asked 1000 times. Not everyone knows that.You post whores...

Ok wet sand the lamps with 800 grit until all traces of film are removed. Then finish it off with a 1000 to 1200 grit paper. and unless you have a buffer you will need to compound then polish.

Warning.. be prepared to use AOLT of elbow grease. Unless laugh you have a DA with 800 & 1200 grit paper and a buffer like i do.
Good luck it is alot of work but man is it worth it...........

98 LX,
Eibach`s ....
ICWrims / Potenza`s....
Svt kit w /duals...
BASF Extreme Ocean paint( complete color change)....
Bullit gas door....
Fuba DSM rear mount roof antenna....
Pre 98 trunk....
Blacked out headlamps, W/ Eyebrows....
A6 Side markers....
Shaved antenna and deck lid lock...
4 wheel disc brake conversion....
Magnaflow resinator....
SVT gauge cluster....(Yes the SVT gauge has a O/D light)....
Complete mesh grill treatment, Not gutter guard....
Titinaum window tint....
Burgman custom Power window & lock conversion....
More to come as soon as i complete this one.

Yeah its a LX but it has a 2.5 and it looks better then your ricer smile