i have half the subframe lowered right now, and the tranny bolts are out. the mounts have been completely removed. everything is off that should be except for the starter. would this keep the tranny attatched to the engine? i am having trouble prying the trans away from the block. i called blackcoog (he does alot of swaps) and he said i should have 7 trans bolts out (i do) he also says that the driver side axle should pull right out since i unbolted the lower A arm. he says the pass. side should pull right out without much problem, if i leave the halfshaft in the trans. the trans prys out atbout 1/4" off the motor but seems to be stuck on top. would the starter hold it on?
