Contour Enthusiasts Group Archives Forums Modifications 3.0L Duratec Misc nuts and bolts...

Ok I built of the 3L engine and these are the parts I need to finish it:

**When I say the size of the bolt head I mean the size socket that fits on them**

-5 Timing cover bolts (the ones with 13mm heads that have studs on them for the power steering pump)
-Power steering pump nuts and bolts. There are a few 10mm nuts and bolts that hold the power steering pump in place. There should be two long bolts, two short bolts, and 7 nuts.
-Power steering pully bolts. I need all four 10mm bolts
-Idler pully and bolt to hold it on
-2 of the shorter engine mount to block bolts. The huge metal engine mount that bolts between the heads. There are four bolts and two are shorter. I'm missing those.
-All the transmission to block bolts
-2 Radiator mount bolts. They have 8mm heads and are pretty small.

Let me know if you might have them or if you have questions. I'll snap shots of the bolts I need if I have another right now.

Thanks,
Chris