Originally posted by warmonger: The chains look right to me. The smaller pitch chains are noticeably different.
Are you sure you don't have the wrong cams?
You should pull off one timing chain and then test fit your other chains to be sure. Pull the part numbers off the cams just to be sure as well.
You know what Tom? Look at the pics of the chains on the sprockets. It looks like the links between the pins are resting on the tops of the teeth - thus stopping the pins from seating deeper into the sprockets. I wonder if the cams are indeed wrong??
2000 SVT Turbo 295hp/269ftlb@12psi
#1 for Bendix Brakes Kits!
Knuckles rebuilt w/new bearings $55
AUSSIE ENDLINKS $70
Gutted pre-cats $80/set
A lack of planning on your part does not constitute an emergency on mine!
|