ExDelayed,
I forgot to mention, try using the blow dryer or heat gun first. Then, whatever glue may be left behind use the adhesive remover to clean up. BTW, it's also very good for getting road tar, gum and the like of your ride. Also, remember to keep the heat source on the pinstripe as you pull it off and keep the surface warm as it is easier to work with that way. I always found the best distance from paint to heat gun to be about 4 inches or so away. The paint should also never get to hot to touch, should be warm enough to melt the glue but not hot enough that you can't keep your hand on it. You don't won't to harm your paint by putting concentrated heat on it. It will take a while to do, so be patient. I hope I haven't got you worried, but please remember that I grew up working on other peoples cars at the sake of my dad's name so I'm a little over precatious.
Enjoy your new look as I know you will.
Mike
