Well...thats a good question. When we pulled the subframe off of the car (before it was fixed) we noticed that there was a scar on the bar from where it was rubbing before (even though it was not making noise). I will note that the bar was on there for 3 years with the original brackets (not reinforced) and they were pretty twisted up. Now that I look at it, when I had the brackets on the subframe redone they should have moved them away from the subframe a bit. I'm going to take it to the shop tomorrow and have them take a look at it. Hopefully there is a way to mess with the U-brackets that hold the bushings so that we can move the bar and bushings further away from the subframe. I'm leaving for school in the afternoon so if it takes more than that I guess I'll have to tackle it over thanksgiving
