Originally posted by gearhead:
Wow! this is the night for key fob questions! Ironically, I just received today the one I got from someone on eBay. What matters is the FCC code on the back of the fob(GQ43VT4T). If you have one and are looking for another, you must get one with the same FCC code. If you don't have one, you'll need to find the code, maybe on the receiver which I think is behind the glove box under the dash. Do a search using the words "key fob" in the maintenance forum or the general forum, I forget which I searched in, for more information. It's easy to program once you find one. BTW, the one I got was new in factory sealed Ford packaging and only cost me $9.99 + $5.00 shipping. Good luck!




Wow, now that's a bargain! I think I paid almost $20 for mine on eBay a few months badk and it was used. At the time it was one of the few on there though and is a LOT cheaper than getting a new one from Ford. I wouldn't mind picking another one up (a brand new one would be super nice)if they can be found that cheap though. Which seller did you get yours from???

To my knowledge though the only real way to tell if you have the keyless entry setup is to check for the programming plug behind the dash. It's actually quite easy to find using one of two methods (if you haven't found this info already):

1.) Open the glove box all the way and pull in on the two side pieces. These pieces have rounded ends which stick out to keep the door from falling all the way down. Pulling out on them will allow these parts to come out all the way. Once opened like this you should be able to see all the way back behind the dash including the black ecu box. There should be a white plug with a yellow insert attached to it if you have the keyless entry option. It may be hanging down behind there though so just dig around CAREFULLY and you should be able to find it if it's there.

2.) If you can't find it the first way then just take out the plastic plugs on the passengers side footwell (these are in front of the door on the right side of the footwell). You can then pull out on this trim piece which will give you access to the under dash area. You'll probably need a flashlight, but you should be able to look right up under where the ecu is and the plug would be right there.

Hope this helps some....

Ben *now* '00 CSVT T-red/tan #1684/2150 *sold* '92 Galant VR-4 #580/1000 *sold* '93 FD3S TT