Originally posted by shanalg82:
====MLPS REPLACEMENT HOW TO====


Things needed:

5/16 open ended wrench
MLPS - Part # 6L8z-7F293-AA
Optional electrical contact cleaner



1. I found it easiest to just get the air box out of the way.

2. Put the car in neutral (don't forget the e-brake)

3. Using a 5/16 open ended wrench remove the two bolts.

4. Pull off plug, then the MLPS should just pull up off of the shaft.



5. Put the new MPLS on the shaft, there are notches that it must slide onto.

6. Bolt it back on ensuring that the line for Neutral is lined up.



7. Spray some electrical contact cleaner just to make sure that the connetion is clean, then plug it back in.


New vs. Old (The guy at Ford said this is the 5th part number...)



This seems to have fixed my problem for now!


but what if your neutral dont line up how would u adjust that , plz give me a how to or something in detail, thanxs , cause if im right your drive and your neutral are suppose to line up , right?