Originally posted by 111R:
dion: i guess my only other qestion would be depending on a seat that uses 4-point harness, will it matter what height the bar has to be to feed in the belts?
and if you can confirm that the kit could be removed i am going to buy one. it looks ridgid.
and that camera mount is excellent 
-a
I was told by John that the seatbelt pass through area should be "level" with the bar. That is ideal, according to John.
The bar can be removed at any time. Two bolts on the floor, and the two on either pillar, and the bar is out.
dion
98 SVT, 200 whp/190 lb. ft tq (tuned by ADC), 3.0, P&P heads w/2.5L valves, optimized TB, MSDS, SCA 2.5" catback, SHOshop UIM/LIM, underdrive pulley set, TD's, Koni/H&R, BAER/TCE, Progress, CF1 products
| 
