Contour Enthusiasts Group Archives Forums General Troubleshooting 96 Contour Not Starting Properly

Print Thread

Re: 96 Contour Not Starting Properly #1372506 08/29/05 11:51 PM
Joined: Sep 2000 Posts: 4,693 Thousand Oaks, California, USA B Big Jim_dup1 Hard-core CEG'er
Big Jim_dup1 Hard-core CEG'er B Joined: Sep 2000 Posts: 4,693 Thousand Oaks, California, USA	Just to add to the above. If it is the IAC then you can overcome it by holding the throttle down slightly when cranking. The IAC would only cause stalling if you were off the throttle when it was happening. Jim Johnson 98 SVT 03 Escape Limited

Entire Thread
Subject	Posted By	Posted
96 Contour Not Starting Properly	ddillard	08/29/05 05:08 PM
Re: 96 Contour Not Starting Properly	Tony2005	08/29/05 11:42 PM
Re: 96 Contour Not Starting Properly	Big Jim_dup1	08/29/05 11:51 PM
Re: 96 Contour Not Starting Properly	chongo	08/30/05 01:22 AM
Re: 96 Contour Not Starting Properly	bigworm	08/30/05 05:02 AM
Re: 96 Contour Not Starting Properly	ddillard	08/30/05 06:08 PM
Re: 96 Contour Not Starting Properly	ddillard	09/08/05 08:52 PM
Re: 96 Contour Not Starting Properly	Tony2005	09/08/05 09:22 PM
Re: 96 Contour Not Starting Properly	ddillard	11/04/05 11:33 PM
Re: 96 Contour Not Starting Properly	Tony2005	11/05/05 02:32 AM
Re: 96 Contour Not Starting Properly	ddillard	11/05/05 03:35 AM
Re: 96 Contour Not Starting Properly	Tony2005	11/05/05 03:39 AM
Re: 96 Contour Not Starting Properly	ddillard	11/07/05 07:26 PM
Re: 96 Contour Not Starting Properly	Tony2005	11/07/05 07:49 PM
Re: 96 Contour Not Starting Properly	NKENN	11/06/05 05:04 PM

Link Copied to Clipboard