Originally posted by SleeperZ:
My intake setup, which works very well.




Since this picture I added a 3" cold air draw from the airbox to the fenderwell.
I still need to add a plenum above the TB. (Stock one works ok, but a better can be designed.)
I also need to put a scoop in the fenderwell to aim air into the airbox.



So with the plenum on, you only need a 45, the straight (6-8"?) piece to connect to the plenum, and the 3" piece to go from the air box to the fender. Is that correct?

Or will the straight piece off the 45 not connect to the plenum correctly? I've never been 100% sure of exactly what was needed for your setup with the plenum left on.
-Peter