Contour Enthusiasts Group Archives Forums Modifications Audio Remote Start Pats Bypass Module DEI 555F

You program it the same way u program a new key.

Place one key in the ignition, turn to on, then off and out of the ignition.
Place the second key in the ignition, turn to on, then off and out of the ignition.
Then press the remote start button with that little thing next to the PATS recieve and it'll program the bypass.

If you don't have a second key, you'll probably have to get one made and have them scan the ECU for the code and program it into the new blank. That can get expensive unfortunately, unless you have the right connections.

Good Luck,
Robert