The flasher pics are not displaying. You may want to repost. BTW the removal and insertion of the switch is tempermental. Sometimes it is easy and sometimes it is not.
I had similar issues with the turn signal not working and then the 4 way hazards working OK. I can only surmize that in my case the solder joint issue was developing and the first time I opened up the flasher it was not fully developed and even though I looked for it I could not see it. The second time I had no trouble in spotting it and it is clearly visble on the photo I sent.
You may want to take the old switch apart to inspect it as well. I am sure there are a number of failure reasons for the multifunction switch.
