Originally posted by MP3Tour:
Ok I was wrong. I found out that the c in IVC stands of Intake valve closing, and I'm not sure but I think It needs it in degrees. So I still need these readings

Intake Valve Overlap (BTDC)
Exhaust Valve Overlap (BBDC)

Intake Valve Closing (ABDC)
Exhaust Valve Closing (ATDC)

I am trying to build a stock profile in desktop dyno 2000

by the way If anyone has a manual for this program it would help alot as well.



heck, I was wrong again, I really should check before typing, sorry.

It's Intake valve opening and
exhaust valve opening not overlap DUH!

and what ever the input should be it only goes from -25.0 up to 50.0 on intake valve opening

-10.0 to 95.0 on exhaust valve opening

-10.0 to 95.0 on intake valve closing

-25.0 to 50.0 on exhaust valve closing

sorry again and thanks for any help you can offer.

Last edited by MP3Tour; 07/28/05 05:00 AM.
99 ATX Contour 130k w/ a 21k tranny freshly installed Secret Project in the works
Originally posted by unknown:
Never argue with an idiot, ppl may not be able to tell the difference between you.