Here's the link to the installation pictures: shift and e-brake boot intallation pictures

Some additional notes on the installation:

1. Use a 3/32" drill bit when drilling out the plastic welds on the e-brake boot frame.
2. Allow approximately 30 minutes for the epoxy putty to cure and test that it has bonded securely. I'm sure you can use other methods to reinstall the e-brake boot frame to the center console, but that's what we used.
3. On the shift boot, there is an elastic band incorporated around the opening, so the zip-tie is no longer needed. There is also one on the e-brake boot, which makes for a snug fit, but it works nicely.

On my shift boot, I elected to have black leather with red stitching. Because of their sewing machine, one edge gets stitched shorter than the others (they assured me this was NORMAL). Redline will revise the boot so that this will occur on the edge furthest away from the driver.

Originally posted by LUCA:
Yep. You can be Phil too if you'd like.