Alright fave, That would really be apreciated. I didnt mean ground sorry, I ment with the voltmeter..
when I check the volts on the black relay by using the 5 and 3 pins its 12v.
when I check the volts on the green relay using the 5 and 3 pins its 0 now if I leave positive volt checker on and touch the negative on the batter I get 12v.
So basicaly im getting 12 volts through the black relay but the green relay will only pull 12v when I use a different ground then the 5 pin
does that make more sense? So what im trying to figure out is if the green relay should have 12v running through it when I check with a voltmeter and use the 3 and 5 pins as the positive and ground? because my green relay does not, I have to use a different ground then we get 12v.
phew! thanks again for ALL your help Fave.
