I've stated this a million times, and I'm far from an Audio expert - but to install 6x9's in any of the doors is BASIC!

You take the grill/cover they supply with the speakers and then put the plastic bezel (minus the actual grill piece) BEHIND the speaker. This then acts as a template for mounting the 6x9 AND as a spacer to set the speaker out from the door, so the magnet doesn't hit anything in the door. We installed 6x9 Pioneers in all four doors of two SVT's without have to cut anything. You just drill a couple new holes to suit the bolt pattern of the 6x9 vs the 6x8 and that's about it. On some speakers you need to trim the door pull reinforcement bracket on the back door as it can touch the eadge of the spreaker frame, but that's it.


2000 SVT Turbo 295hp/269ftlb@12psi #1 for Bendix Brakes Kits! Knuckles rebuilt w/new bearings $55 AUSSIE ENDLINKS $70 Gutted pre-cats $80/set A lack of planning on your part does not constitute an emergency on mine!