broke the bleeder valve and screwed up the caliper on a '98 e1 svt, so i bought a new loaded caliper from napa (passenger front). it was $55 after core. after replacing it, the car obviously pulled to the right due to the new pads and caliper only on one side.. now here's the question:
should i replace the driver's side caliper to balance out with the new caliper on the passenger side? if so, should i ONLY buy a napa one, or would any caliper from anyone do? (as i'm worried about some specs getting out of whack from different caliper manufacturers) or should i just buy new pads and leave the caliper be? the reason i'm weary of buying just new pads is if the two different calipers are slightly out of spec (napa vs ford manufactured) i don't want the brand new pads (which i'll buy from stazi) to then be worn down out of whack.
sorry if the post is confusing at all, if it is please just let me know and i'll try to rephrase. thanks.