Originally posted by contourdad:
I have the same problem. When I am backing and turning the wheel to the right, I get a grinding sound from the right front end. The wheel is not even to the stop when this happens. I don't hear anything when backing and turning the wheel to the left. And this started when I had the RF wheel bearing replaced a couple of months ago.
I would look (in YOUR CASE) at another failed bearing. The axle nut is ONE TIME USE only. this will cause bearing failure.
Also, tighten to 208-214FOOT/lbs, this will cause failures is not tight enough
Ray
'99 CSVT - Silver #222/276
In a constant state of blow-off euphoria.
Originally posted by Kremitthefrog:
I like to wear dresses and use binoculars to watch grandmas across the street.
| 
