|
|
Joined: Oct 2000
Posts: 3,867
Hard-core CEG'er
|
Hard-core CEG'er
Joined: Oct 2000
Posts: 3,867 |
Originally posted by Salvin: Hello everyone.
I had my turbo groove EBC slottet and drilled rotors on for 500 miles now and it was a improvement from the original system on the SVT at start.
Then from out of blue I get vibration, cant really say if it's from the rear or front but the steeringwheel shakes a little.
Another wierd thing is that theres no vibration when the rotors are cold but after a couple of stops everything vibrates.
Anyone had problems with almost brandnew EBC rotors? cause 500miles shouldnt warp a rotor like this.
I used ebc redstuff pads , (never liked the green color )
Vibe in the steering wheel is generally from the front, IIRC. If it were the rear, you'd feel it in your seat.
I have (supposedly) EBC plain-faced rotors all around with Mintex A/F and have not had any trouble. I put about 500-600 miles on them (IIRC) before doing a pretty thorough seasoning and bed-in procedure.
Function before fashion.
'96 Contour SE
"Toss the Contour into a corner, and it's as easy to catch as a softball thrown by a preschooler." -Edmunds, 1998
|
|
|
|
|
|