Originally posted by Kevin Van Brunt:
Thanks for that quick reply.

Will I need to remove the battery to get a screwdriver down there? Is the screw vertical or horizontal?




No problem. I know so little, that when I can help, I try to.

I suppose that depends on your battery, but I have not had to remove anything to get at it. A regular size screwdriver will reach. I'm able to get my hand in there to catch the screw once it is unscrewed as well. It's not too tight, the passenger's side is a little tighter.

Did you find it yet? The head faces the hood, horizontally, same as the other two. It should look the same as the other two, but is just buried in there a bit. It holds down the back side of the light, you will see when you get it out. The backside of the light housing has a long bracket on it, I don't know maybe 6-8 inches, and this bracket is held in place with this 3rd screw.

Good luck. Once you find it you will kick yourself for not seeing it earlier.

**It would probably be easier to not remove it all the way
(as the reply above state), just unjscrew it enough to let the bracket come free. I was worried that I would knock it loose, but it is a bit of trouble to get in and out... Next time I'm messing in there, I won't unscrew it any further than necesary.**

Last edited by mean'tour; 06/16/05 07:44 PM.
MUST SELL - ECM computer new for a 98 V6 mtx + pats Now trolling in a Red Nissan 4 x 4