Originally posted by Con-Man:
Pre 98 Con people,
Just went out and brought a corner from the salvage yard for $5.00. I wanted to pratice first. I will say this it is some work involved with this mod grind sand grind some more sand some more. I am using my drill and a adapter to get the orange out. I was about to give up until I finally started see the clear coming through words can't descibe the feeling. I will continue to work on this one once I'm done I will go to the yard and get two corners and work on them to put on the tour. This is a time consuming procedure there is no short cuts so if you need your car do not pull your corners off and think you'll get this done in a weekend. Keep yours on your car and buy another pair to work on. I did a search on clear corners and I read about that secret reflective material that one of the guy's put in there corner does anyone know what that material is yet?
....with a dremel i had both corners done in about 7 hours..so i'm gonna disagree with you about it being a weekend job...but it is def a full day worth,after the silicone drying and whatnot...and also it's a 5 foot mod..anycloser than that and it starts to show the "homemadeness" of the mod..i took them out and bought some mondeo corners,just require some body filler on the fenders
"Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness sobered, but STUPID lasts forever."-Aristophanes.
--93 pgt,headers,intake,borla=14.9 1/4mile
| 
