Hey Chris, I am just seeing if we can get people that have done perfomance mods for the zetec (even if they post on focus sites) to post here. Besides, I didn't see anything listed on here about any such info. I already have a set of comp cams in my ride and found them to be VERY beneficial in making power. With my automatic they don't really get along, (wants to idle higher, feels like it wants to stall) but I am going to be swapping out for another combination in a few weeks. They definitely have a nice growl at cruise speeds though. I just wanted to say that I *JUST* swapped out my head for a 2000 focus piece (not ported, the ports looked a bit bigger on the 95' piece). It had the same lifter buckets in it as my production 95' head. Now I did have a 98' with the VCT on it apart and it had a different set of lifter buckets in it than my 95' head. Any clues?  I know that when you pull the cams it is reccommended that you replace the lifters/buckets as well, Is there any specfic year that is better than the others?
95 Contour, Custom EVO bodykit, 2.0l, PNP Focus head, Stage 2 cams, Je pistons, Eagle rods, 4in1header, 2.5" header back exhaust(complete stainless), D P nitrous, ram air intake, 10mm wires, flamethrower.
| 
