Originally posted by mercman:
A burnt out blower resistor would cause you to loose some or all of the fan speeds but it won�t blow the fuse (it would actually use less current because of higher resistance). The blower switch and associated wiring needs to be checked for shorts and potential shorts. Also, don�t overlook a bad fan motor.
You really should have it tested by a qualified tech to be safe.
jeff
WHOA.. how is there HIGHER resistance with a blown resistor... look at the schematic. the circuit then only has one path: through the high blower speed selection.
Ray
'99 CSVT - Silver #222/276
In a constant state of blow-off euphoria.
Originally posted by Kremitthefrog:
I like to wear dresses and use binoculars to watch grandmas across the street.
| 
