heres pics of the finished article. i cant get it remapped for 3 weeks so i dont wanna drive it till then. i drove it home on minimum throttle and it runs very well inded, the slight misfire it had on low revs (before all this was done) is now cured.
i've got a big 65mm throttle body coming in the post so that will be fitted on there soon, and when i get that i'll have a shiney bit of pipe made for between the throttle body and the MAF.
its now got a 75mm Pro Flow MAF which is properly calibrated for the 30lb injectors.
also a pic of the V6 front brake conversion which was done recently with greenstuff pads and drilled/grooved disks.
