i can help here
put car on jackstands (on frame rail, not subframe)
disconenct and remove
battery
intake setup (pipe, tube, filter, airbox etc)
starter
axles - pop out lower balljoint. no need to take brakes or anything else off
unbolt rack and pinion, i unbolted it from the subframe, and it was a PITA
secure radiator with zip ties
disconnect wires going to the tranny
unbolt radiator, ac canister from subframe
drop subframe
put jack under tranny, remove bell housing bolts and toruque convertor bolts (if its an atx)
take tranny out
that easy
