Contour Enthusiasts Group Archives Forums Modifications Transaxle CD4E with possible/probable worn valve body

Print Thread

Re: CD4E with possible/probable worn valve body #1250051 04/20/05 07:07 PM
Joined: Nov 2001 Posts: 1,176 Austin, TX. B btrautman CEG'er
btrautman CEG'er B Joined: Nov 2001 Posts: 1,176 Austin, TX.	I agree with fastcougar. Replacing the valve body would be a first step without having to remove the tranny..... If you are still in the DIY mode and have energy, I'd pull the atx back out and install a new TC. Dayco is great. Bob An ounce of prevention provides a pound of cure!

Entire Thread
Subject	Posted By	Posted
CD4E with possible/probable worn valve body	garyhill	04/18/05 11:02 PM
Re: CD4E with possible/probable worn valve body	btrautman	04/19/05 01:51 AM
Re: CD4E with possible/probable worn valve body	garyhill	04/19/05 04:37 AM
Re: CD4E with possible/probable worn valve body	fastcougar_dup1	04/19/05 12:58 PM
Re: CD4E with possible/probable worn valve body	garyhill	04/19/05 04:42 PM
Re: CD4E with possible/probable worn valve body	fastcougar_dup1	04/20/05 05:35 PM
Re: CD4E with possible/probable worn valve body	btrautman	04/20/05 07:07 PM
Re: CD4E with possible/probable worn valve body	garyhill	04/20/05 08:42 PM

Link Copied to Clipboard