Originally posted by Y2KSVT:
Originally posted by scottd60:
That's what they are...I have these on my car as well. I did the work myself so I was able to compare them to the originals. I needed to install them when I put on the Baer Track 13" brakes with my 17" FSVT wheels and spacers. They looked exactly the same but longer...same lug nuts, same knurl/spline, same thread just longer and the head/shoulder was about 0.050" bigger in diameter.
Not sure what you are after, if it's all the same and works fine why worry about it 
From what Jim has said, the rx-7 studs aren't long enough for his spacer/wheel setup. I believe you have a 1/4" spacer, while he has 1/2" spacers up front. IIRC, the rx-7 studs are only 10mm longer, while the NAPA part# Jim gave is 13mm longer  .
Mark
WOW!!! 1/2" spacers...you are correct the RX-7 will not be long enough. I would find a different setup...1/2" spacers are huge. I don't even like the idea of 3/8" spacers much less 1/2" Good luck...what's he trying to put on 13" Big brakes and 16" wheels ?
Scott
2000 Contour SVT #1464
Mustang Dyno: 171.6hp/145.3lb
Dynojet Dyno: 171.1hp/148.9lb
1989 20th Anniversary Turbo T/A "Indy 500 Pace Car"
#1376 of 1550 All Original, 46k with a few mods 
2002 F150 SuperCrew
| 
