Originally posted by scottd60:
That's what they are...I have these on my car as well. I did the work myself so I was able to compare them to the originals. I needed to install them when I put on the Baer Track 13" brakes with my 17" FSVT wheels and spacers. They looked exactly the same but longer...same lug nuts, same knurl/spline, same thread just longer and the head/shoulder was about 0.050" bigger in diameter.
Not sure what you are after, if it's all the same and works fine why worry about it 
From what Jim has said, the rx-7 studs aren't long enough for his spacer/wheel setup. I believe you have a 1/4" spacer, while he has 1/2" spacers up front. IIRC, the rx-7 studs are only 10mm longer, while the NAPA part# Jim gave is 13mm longer  .
Mark
2000 Black CSVT
3.0L Hybrid - 206fwhp & 195fwtq
| 
