Hello Louis,
I have a '98 SE and I cannot find that harness which has the programming connector. Do I have to take the glovebox out or should I be able to see it by jut removing the insulation underneath the passenger side dash?

Going crazy, any help would be appreciated.
TIA
Chris
Quote:
Originally posted by louisw:
Programming instructions from Ford:

Turn the ignition to RUN or ACC. Momentarily jump the pins in programming connector located behind the glove box (usually a grey connector with two pins exposed, jump with paper clip or screwdriver). The horn will chirp to confirm programming mode. Press any button on 1st transmitter. The horn will chirp to confirm programming. Press any button on 2nd transmitter (up to 4 transmitters total possible). Turn ignition OFF. The horn will chirp one last time to indicate end of programming mode.

As for buying the fobs, try eBay. I always see a couple up for sale.