Well i went to my friendly autozone to get a t-55 Tried to twist but it really wanted to strip so i stoped. I dont have a air hammer I even tried punch from top But the transaxle is in my way and i did not really want to remove that (If it aint broke dont fix it because stupid is as stupid does) Because what else could go wrong.
Ahhhhhhhhhhhhhhhhh!
Well the ball joint housing is history and i left with a upside down trailer ball. Just a ball at the end of a shaft but the shaft is still in the pinch bolt. i can spin it with my fingers, take a pair of vice grips hook on to it and hammer (supported everything) It aint moving. I can hammer it up and hit it down and i get a bout a 1/8" movement. But then it stops solid. Only good heat source i have is a propane torch for plumming .
