Originally posted by Keyser: Ah yes by the mufflers. At least the downpipe wouldn't be the issue. You were planning a blow through maf I take it Greg? Otherwise your manifold volume would be like 12+ cubic feet. It could be done, but blow through mafs can be a bit tricky.
No way man.
I was thinking of moving backwards and coverting it to speed density.
Yes. Set the MAF up as blow through. I've looked into it and it wouldn't be an issue. The good thing is the air charge would be much less turbulent verses using a blow through MAF on an underhood setup with all the sharp bends required.
2000 SVT #674
13.47 @ 102 - All Motor!
It was not broke; Yet I fixed it anyway.
You were planning a blow through maf I take it Greg? Otherwise your manifold volume would be like 12+ cubic feet. It could be done, but blow through mafs can be a bit tricky. 
