Originally posted by Buckshot77:
Originally posted by ArizonaDynoChip:
.5mm over is .020 . Any further over on a 3.0L and you will have problem finding rings.
Ain't that the truth! I found that out the hard way on Swazo's engine doing a 1mm overbore.
Rick
i have a 1mm overbore also, i couldnt find rings so i had to have my local amchine shop get them for me!
Russell
Oval Port 3L Nearly Done
MTX75 w/ Homebrew Zetec FD and Torsen Complete
| 
