It's not that cold up here!!!
Also if you are worried about the clutch bypass, an easy, and very cheap way to bypass it is to take a voltage meter and measure the voltages on the two wires going into the sensor, then press the clutch in and measure the voltages again. One should be +5V and the other should be less. Then take the voltage difference and work out the size of resistor needed. Cut the sensor out and replace it with the resistor. Done. Although you probably wouldn't be able to use your cruise control anymore, cause the clutch is supposed to deactivate it when pressed.
Last edited by 98cont-UoG-FSAE; 03/27/05 01:15 AM.
