Through the clutch via the crank. It has a special multiplate clutch that is small in diameter to keep the rotational inertia to a minimum, compared to a regular MT which has the clutch bolted to the flywheel, which is bolted to the crank. In the case of the GT, they left out the flywheel.
2000 SVT Turbo 295hp/269ftlb@12psi
#1 for Bendix Brakes Kits!
Knuckles rebuilt w/new bearings $55
AUSSIE ENDLINKS $70
Gutted pre-cats $80/set
A lack of planning on your part does not constitute an emergency on mine!
It has a special multiplate clutch that is small in diameter to keep the rotational inertia to a minimum, compared to a regular MT which has the clutch bolted to the flywheel, which is bolted to the crank. In the case of the GT, they left out the flywheel. 
