That process has a lot of unnecessary steps in it. You should choose either #7 or DC polish since they do the same thing (#7 would be my choice). Note: #80 could be used to replace the Zymol pre-cleaner wax and the polish step. #20 has some level of cleaning in it, so it should go on directly after #7 (or DC polish). Using the #20 after Gold Class will probably remove most of the wax that you just spent a good amount of time putting down! Then, if desired, top #20 with either #26 or Gold Class. When you do get NXT, that can be substituted for #20. You also didn't mention a clay bar. For the best appearance possible, I would highly recommend this step. Here's my recommended process w/ your products:
Wash
Zymol paint cleaner
#7
#20
#26
Here's the process that I use:
Wash
Clay Bar
#80
#81 (polish)
#20
#26
Sometimes I also throw a #83 in before the #80 for a really good cleaning. For an in-between major detailing detail, I do:
Wash
#80
#20
I spend as much time on Meguiarsonline.com as I do here, so I've come quite familiar w/ the recommended process. I would highly recommend visiting
Meguiars to see what's going on in the detail world.
